Format-4 - tempora 60.12 e-motion

Offer No. UK1_55
Available from: as of now

Technology Data

Year of construction: 2017
Motor voltage: 3x 400 V
motor frequency: 50 Hz
Min. workpiece length: 140 mm
Min. workpiece width: 70 mm
Piece Width: 8-60 mm
Chain feeding unit: 12 m/min
End cutting unit: Yes
Radius scraping unit: Yes
Glue scraping unit: Yes
Radius trimming unit: Yes
Premilling unit: Yes
Buffing unit: Yes
Corner rounding unit: Yes
Edging feed for coiled and strip material: Yes

Special features and details

Min. workpiece height: 8 mm
Max. workpiece height: 60 mm
Processing of 0.4-3.0 mm coiled material
Processing of 0.4-12 mm strip material"
E-motion Control
Recording of operating hours for several users
Solid steel machine chassis
Motor driven adjustment of the workpiece feed pressure rollers with 2 offset lines of rollers for equal pressure distribution on the workpiece
Chain feeder with a speed of 12 and 20 m/min and rubber grip pads for maximum grip on the workpiece
Pneumatic-mechanical infeed gate, to prevent the premature feeding of the workpiece
770 mm diameter workpiece support roller, running on ball bearings
Feeding guide with rollers for processing fragile material
Extended infeed (+ 400 mm)
Premilling unit with two 1.5 kW independant motors running at 12,000 rpm and diamond tipped cutters, motor driven positioning of the depth of cut between 0–3 mm, 2 diamond tipped cutters included (Ø= 80 mm, H= 49 mm, Z 2+2)
Infrared heat lamp for pre-heating board edges
Edge feed for coiled and strip material 0.4–12 mm thick, with edge presence recognition via an infra-red sensor
Guillotine trimming unit for the precutting of PVC/ABS edgeband material 0.4–3.0 mm thick
Teflon coated gluepot with 1.5 kg capacity, glue applied using a fine-adjustable glue roller and quick change system as well as monitoring of the heating cartridge (approx. 250 running metres per 1kg glue granulate on a 19mm panel)
Preparation for retrofitting a premelter
Reverse function of the glue application roller
Pneumatically feed-controlled glue unit
Motor driven positioning of the pressure unit with 1 large motor driven roller and 2 conical rollers operating pneumatically
End trimming unit with 2 independant motors, each with 0.50 kW and 12,000 rpm, both pneumatically tiltable between 0°-15°
Multi functional trimming unit for radius and flush trimming and bevel trimming of thin edges with 2 independant motors, each with 0.75 kW and 12,000 rpm, motor driven positioning of the edge thickness adjustment and pneumatic disengage function via the control panel
Multi-functional trimming unit with vertical reference rollers for the processing of workpieces with hinge bores
Corner rounding unit with 2 independent motors for soft and postforming workpieces and for the processing of front and rear edges with 0.4-3.0 mm edge thickness and 10-60 mm workpiece height; motorised positioning of the corner rounding unit
2-axis, motor-driven, position-controlled radius trimming unit incl. pneumatic reverse function
Glue scraping for nesting
Buffing unit with 2 motors
Spraying unit for cleaning fluids situated before the polishing units
Spraying unit for separation solution positioned at the front of the machine (PUR-Glue)
Spraying of lubricants

Location

FELDER UK LTD.
Unit 2, Sovereign Business Park, Joplin Court off Presley Way, Crown Hill
MK8 OJP MILTON KEYNES
+44 1908 635000

Similar machines