Format-4 - perfect 608

Offer No. UK1_70
Available from: as of now

Technology Data

Year of construction: 2013
Tape thickness: 0,4-3,0 mm
Motor voltage: 3x 400 V
Quick-Set-System: Yes
Min. workpiece length: 10 mm
End cutting unit: Yes
Radius trimming unit: Yes
Premilling unit: Yes
Corner rounding unit: Yes

Special features and details

The machine frame of the perfect 608 edgebander is made of thick-walled arc-welded steel. Ribbing within the frame ensures high stability.

x-motion Plus control

perfect 608 chain feeder:

Feed rate 12 m/min

Drive motor 1.5 KW (S6)

Min. workpiece length 140 mm

Min. workpiece width 70 mm

Segmented rubber-covered support pads with quick change system.

The minimal workpiece width varies depending on the workpiece length, height and type of surface

perfect 608 upper pressure beam:

Pressure beam made of welded torsionally resistant steel. Workpiece height adjustable from 8 to 60 mm with the hand crank.

Smooth double-row staggered double-acting rollers distribute pressure evenly

Pneumatic mechanical feed lock to monitor the workpiece distance. Pneumatic controlled steel bolts prevent workpieces being fed before the minimal workpiece distance has been attained.

Rotary tape coil unit for tape coils 0,4-3 mm

Rotary tape coil unit supported by ball bearings. Rotary plate diameter 800 mm.

Edge feed for rollers and strip edges Edging feed for roll goods and strip materials from 12 to 64 mm edge height A powered, rubber-covered feed roller guides the roll material to the workpiece. In order to be able to process strip material, this feed roller can be exchanged to a pin grip roller using the quick change system.

An infrared edge sensor registers operational readiness as soon as edge material is in the machine. Maximum edge thickness: Perfect 608: 0.4-8 mm

Workpiece feed and feed guide with manual adjustment: The feeding bearing surface is a roller conveyor for delicate surface finishes. The solid feed guide is 700 mm long.

"Pre-Milling Unit with plunge-controlled:
diamond cutters, speed 12,000 rpm, 1.1 kW (1.5 hp), max.3 mm chip removal, spiral planing cutterhead with diamond knives Z2 +2, D = 60 x 49 mm"

pneumatically controlled glue pot 1,5 kg capacity Teflon-coated glue unit EVA granules with synchronised glue roller and fast change system.

Corner machining unit for Post- and Softforming profiles. Controlled shaper unit to machine facing edging. Tape thickness from 0.4 to 3 mm. Workpiece height from 10 to 45 mm.

Pressure roller unit pneumatically controlled. 1 motor-driven and 2 conic pressure rollers, manually adjustable readable from digital counter.

End trimming unit with 2 motors, 24T D-100x20x3.2 mm pneumatically controlled tilt 0°-15°

"Upper combination trimming unit
Flush and radius trimming unit position-controlled 1 high-frequency motor 0.75 kW (1 PS) 12000 rpm."

"Lower combination trimming unit
Flush and radius trimming unit position-controlled 1 high-frequency motor 0.75 kW (1 PS) 12000 rpm"

x-motion Plus upper and lower radius knife to process 2 and 3 mm plastic edging tape.

Buffing Unit with spray


Unit 2, Sovereign Business Park, Joplin Court off Presley Way, Crown Hill
+44 1908 635000

Similar machines